Fan problem

deltree 25-06-2008, 02:34 PM

Rating: ()

I have extracted 2 fans from my amd hsf assembly both fans are capable of doing 6000rpm these r da fans that come wid socket 754, the problem is i dont have the connectors to put these fans on in my stupid mobo, one fan is processor the oda taken up by psu and im left wid no more sockets for the fan....

jugaar is welcome guys especially if i can run these fans at full speed yes 6000rpm!

__________________
All the children had stable computers except Lidia, she had a chipset from nVidia.

deltree

another thing that i will followup is the bsel mod, i need a circuit writer pen! where to get it guys? and how the hell do i remove the hsf assembly the new hsf assemblies frighten me i mean how the hell m i gonna remove it any guides to that?

another thing is vcore drooping very bad? mines drooping madly from 1.38-1.41
max voltage is 1.35!

no voltage settings on the mobo and i know this is mobo fault! but should i care? 3 year warranty zindabad

psu isnt the problem it was stable with the amd!

__________________
All the children had stable computers except Lidia, she had a chipset from nVidia.

ali.tayyab

1.to get fans to run at full speed:
simply extend the +12V and GND to the corressponding wires on a molex connector. (yellow + black).

2. to remove the hsf off the cpu?
simply twist the four *legs* as shown in the manual and pull em, diagonally.
the *guide* is included in the processor manual and should also be in the mobo manual

3. conductive pen/ pencil/ paint:
i tried looking for it once, couldnt find it. look for it at a electronic hobbyist store. someone once told me that it can be found in hall road lahore. i am in no mood to go to lahore. i am sure there is such a market in karachi as well

deltree

aray khi zindabad find me a khi based engineering student on this forum lets get him here he shud knw...i knw khi has markets based for everything and iv been to a electronic circuit market chips etc are all there!


fan ka scene samajh nai aaya yaar....got 2 fan connectors 3 pin each on the mobo....psu uses one of those fans and the other one the processor uses....no more connectors left but i have 2 3 pin fans that i want to use how to use them? i do have the yellow and black only molex connectors....the psu is a HEC SILENT 385

__________________
All the children had stable computers except Lidia, she had a chipset from nVidia.

fajoo24

Deltree, chk out the cooperative market saddar, u may find ur desired product there....

__________________
[ Intel E2180@2.9 ghz | Asus P5K-VM | Kingston ddr2 667 2x1gb | XfX 9600 GT 512 mb | WD 250 GB Sata2 | Samsung S203d 20x DVDRW | Liteon 16x DvD Rom | Asus 350 Watt X-35gp ]

PK Forum Community

 

ali.tayyab

fan:
1. splice the connector off the end. before u do that make sure u mark the wires +12V, GND and speed. how do u do that? simple plug the connector on the mobo (WHILE ITS OFF), read pin alignment from manual.

2. now find a molex splitter. split one end off. the other end u'll plug into the molex connector on ur psu. now connect yellow wire to the +12v on the fan, and the GND to black.

if u want to connect 2 fans u can either be brave and join both +12v's and both GND to one yellow + black or use two molex splitters


this pic *might* help:

Asad

Ali, a Molex connector is:

| +5 | GND | GND | +12 |

GND wires for each positive voltage are in the middle. By connecting across +5V and +12V, you are essentially giving the fan +7V of potential difference.

__________________

w00t!!!

~~~~~~~~~~~~~~~~~
I don't drive fast. I fly low
~~~~~~~~~~~~~~~~~

{ Blog }

{ A Great Loss: Randy Pausch Is Dead }

Geo Musharraf!

deltree

i am so lost here ur teaching this to a business student lol....sigh i think ill just let it go....circuit writer here i come!

__________________
All the children had stable computers except Lidia, she had a chipset from nVidia.

ali.tayyab

thus i wrote the color of the wire as well as it's polarity

deltree

ali tayyab my man heres the scene....good pic i get the point now heres my point....

i just found 2 molex connectors on a single wire which just have black and yellow the molex states fan only! now if i dont want to splice this stuff cuz if i sell this psu later on or something would really ruin the originality....

the other point it since the 2 molex connectors come on a single wire wouldnt its be complicated if i strt removing them? could do the same with the fans?

common guys help me make use of these iv got 2 amd heatsinks and 2 fans...and a system that finds it hard to make use of them but doesnt find hard to make da heat to use them

ideas ideas ideas!!!!

or i could sell the current psu invest in a new cm 460? does it have the fan connectors? :$

__________________
All the children had stable computers except Lidia, she had a chipset from nVidia.

PK Forum Community